This page is the home for my Logitech Precision Gamepad / Hobbytronics USB Host emulator. I wrote it so that I wouldn't have to drag both the Hobbytronics board (and the gamepad) out of the car, just to test my software.
Operation:
This program sends the same data to the serial port that a Hobbytronics
USB Host sends, when a Logitech Precision Gamepad is connected. It can
be controlled with a mouse or with a USB gamepad.
![[GPSim]](gpsim.jpg)
Software Requirements:
- Pentium processor or later (tested on an Intel Core i5)
- Windows 2000 or later (tested on Windows 8.1)
- One free COM port (COM1 through COM16 are supported)
- NULL modem cable or com0com
Last Update: 10-02-2018
Copyright © 2001-2024, Brent Harris
All rights reserved.